Acetyl Tributyl Citrate CAS 77-90-7
Factory wholesale Acetyl Tributyl Citrate CAS 77-90-7
- Appearance:Liquid
- Purity:99.8%
- Delivery:30days
- Sample Available:Available
- Payment:L/C,T/T,D/P,Paypal,Money Gram,Western Union
- Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
- Transporta:Ocean, Land,Air, DHL，TNT FedEx
Name: Acetyl Tributyl Citrate
CAS: 77-90-7
MOQ: 1KG
Directory Guidance on Acetyl Tributyl Citrate
Chemical Structure
Basic Info:
| Melting point | -59 °C |
| Boiling point | 327 °C |
| density | 1.05 g/mL at 25 °C (lit.) |
| Pour Point | -43 |
| vapor pressure | 0.26 psi ( 20 °C) |
| refractive index | n20/D 1.443(lit.) |
Product Introduction:
Acetyl Tributyl Citrate’s physical properties include a boiling point of 343degC at normal pressure, flash point 204degC in open cup conditions, freezing point of -80degC, density ranges between 1.0451.055g/cm3 at 25degC and refractive index values between 1.4410-1.4425 at 25degC; it is insoluble in water but miscible with most organic solvents; its volatilization rate at 105degC is only 0.000009g/cm2*hour while hydrolysis rate in 100degC water for 6 hours is only 0.1% making this chemical highly reliable when applied industrial applications.
Acetyl Tributyl Citrate boasts very low acute toxicity, with an oral median lethal dose (LD50) of 4000 mg/kg for rats. As such, it has been certified non-toxic by both the U.S. Food and Drug Administration (FDA) and multiple international organizations such as the European Union; hence its safe usage can be seen across food contact materials, medical devices and other fields with stringent safety requirements.
Acetyl Tributyl Citrate production requires citric acid, butanol and acetic anhydride as primary raw materials; its production takes place through a two-step reaction. Temperature, pressure and catalyst dosage must all be strictly managed during this process to ensure product purity and performance indicators meet industry standards. At present, industrial products of Acetyl Tributyl Citrate typically reach over 99% purity; its acid value falls under 0.2 mgKOH/g and moisture content does not surpass 0.155%, with heavy metal and arsenic contamination being strictly managed between 10ppm-3ppm to meet quality requirements set for high end applications.
Nature and Specifications:
| Item | Specification |
| Product Name | Acetyl Tributyl Citrate |
| CAS No. | 77-90-7 |
| Appearance | Liquid |
| Shelf Life | 2 years |
| Packing | As your requirements |
| Fp | >230 °F |
| storage temp. | Store below +30°C. |
| solubility | Not miscible with water, miscible with ethanol (96 per cent) and with methylene chloride. |
| form | Liquid |
| color | Clear Colourless |
| Odor | at 100.00 %. very faint herbal wine sweet |
Product service:
- Certificate Of Analysis (COA)
- Material Safety Data Sheet (MSDS)
- Route of synthesis (ROS)
- Method of Aanlysis (MOA)
- Nuclear Magnetic Resonance (NMR)
- Packing pictures and loading video before loading
- Free Sample
- Factory audit
In the plastics industry, Acetyl Tributyl Citrate is widely used as a primary plasticizer in polyvinyl chloride (PVC) products, such as food packaging film, medical infusion bags, artificial leather and flooring materials. Its plasticizing efficiency is equivalent to that of the phthalate plasticizer DOP, and it has excellent compatibility with PVC resin, and no precipitation or migration occurs when a large number of products are added, while giving the product good flexibility and surface finish.
In the field of cellulose resins, Acetyl Tributyl Citrate can improve the processing properties of cellulose acetate and is used to produce high-transparency films and water-resistant coatings; in synthetic rubber, it can improve the elasticity and low-temperature impact resistance of rubber, and is suitable for products such as automotive seals and industrial hoses. In addition, Acetyl Tributyl Citrate is also used as a stabilizer for polyvinylidene chloride (PVDC), which acts as a barrier to oxygen and moisture in food cling film and pharmaceutical packaging for extended shelf life.
In the non-plastic sector, the Acetyl Tributyl Citrate is equally versatile. As a coating additive, it can optimize the leveling and adhesion of the coating, especially for wood paint and metal anti-corrosion coatings. In ink manufacturing, Acetyl Tributyl Citrate regulates ink viscosity, improves printability and drying speed, and is widely used in food-grade packaging printing.
The cosmetics industry uses its good solubility and low irritation to add it to nail polish, hair spray and other products as a plasticizer and film forming aid. It is worth mentioning that the Acetyl Tributyl Citrate has shown potential in the development of environmentally friendly lubricants, and its low volatility and high thermal stability make it ideal for grease formulations under high temperature conditions. As global restrictions on phthalate plasticizers tighten, the Acetyl Tributyl Citrate continues to grow in demand for alternatives in toy manufacturing, children’s products and more, making it one of the most economical and environmentally friendly plasticizer solutions available today.
The core strengths of the Acetyl Tributyl Citrate are, first and foremost, its superior environmental safety. Compared with traditional phthalate plasticizers, Acetyl Tributyl Citrate does not contain benzene ring structure, does not release environmental hormones, and has passed strict certification such as EU REACH regulations and Japan’s Chemical Review Law, in line with international green chemistry development trends.
Second, the chemical properties of the Acetyl Tributyl Citrate are well-balanced: cold resistance to extreme temperatures of -80 ° C, light resistance to ensure that products do not yellow during long-term outdoor use, and oil and solvent extraction resistance to ensure the stability of packaging materials in contact with grease.
In terms of processing performance, Acetyl Tributyl Citrate has a wide range of compatibility with resins. It is not only suitable for general plastics such as PVC and PVDC, but also can be well combined with engineering plastics such as polystyrene and polyvinyl butyraldehyde, and has high plasticization efficiency. It can replace DOP 1:1, and the dosage is about 20% less than DINP.
From the product economic analysis, although the raw material cost of Acetyl Tributyl Citrate is slightly higher than that of traditional plasticizers, its comprehensive cost performance is significant. For example, in the manufacture of PVC medical catheters.Products using Acetyl Tributyl Citrate can be sterilized by gamma rays without precipitation, reducing the rate of defective products.
In the field of food packaging, its low migration characteristics can avoid contamination of contents and reduce the risk of recalls caused by quality problems. In addition, the low volatility of the Acetyl Tributyl Citrate reduces losses during the production process. Packaged in 200L iron or galvanized drums (net weight 200Kg/ barrel), it has good stability in transportation and storage, and has a shelf life of more than two years at room temperature.
With the advancement of global research and development of bio-based materials, the process of producing citric acid by corn fermentation is becoming more and more mature, further reducing the carbon footprint of the Acetyl Tributyl Citrate and meeting the needs of sustainable development in the context of carbon neutrality.
Contact Us
Product Package picture：
Related References:
chemicalbook-Acetyl Tributyl Citrate
Acetyl Tributyl Citrate Manufacturer
Contact Us
As an experienced Acetyl Tributyl Citrate manufacturer and supplier, Look Chemical is committed to producing and selling high quality products.
We cooperate and trade with 6000+ factories around the world, and our high-quality products and excellent services make us enjoy a high reputation internationally.
As Acetyl Tributyl Citrate CAS 77-90-7 supplier, Look Chemical provides supply chain solutions to partners and customers in a wide range of industries. We offer competitive pricing and quality products.
If you have a demand for this product, please contact our company’s sales staff, we will provide you with a solution in the shortest time.
Transport proposal
1. For products ≤50kg, we recommend using express delivery, which is usually called DDU service (discounted, convenient).
2. For products ≤500kg, we generally recommend air freight, which is usually called FOB, CFR or CIF service (fast and efficient).
3. For products >500kg, we generally recommend shipping by sea, which is usually called FOB, CFR or CIF service (economical, safe).
4. For high-value products, please choose air or express to ensure the safety of product transportation.
Shandong Lookchemical service:
* Timely reply and 24 hours online, the professional team will provide you with the most favorable prices and high-quality products.
* The sample supports testing and inspection.
* Each batch of products will be tested to ensure that its quality meets user needs.
*Packaging can also be made according to customer requirements.
*Any inquiries will be answered by our relevant personnel within 24 hours.
*We will provide you with commercial invoice, packing list, packing list, COA, health certificate and certificate of origin if you need it. If your market has other special requirements, please let us know.
*We will monitor the logistics information in real time and will share the information with you.
* You can consult us at any time if you have any questions about the product, and we will answer you in time.
*If you have any questions about the product, you can report it to us, we will deal with it in time for you, and the product can be returned.
Contact Us
Frequently Asked Questions(FAQ):
We will make samples before mass production, and after sample approved, we’ll begin mass production. Doing 100% inspection during production, then do random inspection before packing.
Our MOQ is 1kg. But usually we accept less quantity such as 100g on the condition that sample charge is 100% paid.
Yes. We’ll give you product analysis report before shipping.
Different quantity has different discount.
Yes. Welcome to visit.
You can get free samples for some products,you only need to pay the shipping cost or arrange a courier to us and take the samples. You can send us your product specifications and requests,we will manufacture the products according to your requests.
